Harbor Freight Ad Pennsylvania

Carpentry tools from Harbor Freight Ad Pennsylvania


Manual carpentry tools from Harbor Freight Ad Pennsylvania should be present in the arsenal of any man who is used to doing household chores with his own hands. A set of devices for wood processing is determined by the type of work performed.
Tools for cutting wood Planing tools Measuring and marking devices Drilling and threading tools carpenter Additional equipment.

Harbor Freight Ad Pennsylvania
Harbor Freight Ad Pennsylvania


Tools for cutting wood from Harbor Freight Ad Pennsylvania

The set of carpentry tools for cutting wood from Harbor Freight Ad Pennsylvania includes:
saws and hacksaws;

  • jigsaws; knives,
  • cutters,
  • scalpels;
  • woodworking machines.

Saws and hacksaws
longitudinal and transverse cutting – classic hacksaws; cutting holes – circular saws; manufacture of connecting spikes – spike saws.
According to the design, there are saws:
two–handed, used for sawing large logs; one-handed – hacksaws; bow – with a stretched canvas; award – short saws.
Hacksaws for slitting have teeth tilted forward, for transverse cutting – symmetrical teeth. Saws with a large tooth (4-6 mm) are used for sawing logs and bars, with an average (3 – 3.5 mm) – for cutting medium–sized parts, with a small (2 – 2.5 mm) – for the precise manufacture of small parts.


According to the international classification in the marking PPX or EPX, the number X indicates the number of teeth per inch. The smaller the teeth, the larger they are. For cutting raw wood, hacksaws are used, the teeth of which are arranged in groups of 5-7 pieces. The gaps between the groups are needed to remove the glued raw sawdust.


Jigsaws Harbor Freight Ad Pennsylvania


A jigsaw is a type of bow saw with a narrow blade and a large distance between it and the frame. The frame has a U or U-shape. The jigsaw is used for curly cuts. It provides high quality cuts and precision manufacturing of parts.


Woodworking machines Harbor Freight Ad Pennsylvania


When sawing wood, they use:
circular saws for longitudinal and transverse cutting; machines for cutting bars; electric jigsaws.


Tools for planing.


Carpentry tools and devices for planing include planes, jointers and cycles.


The plane consists of the following parts:
a block (housing), a knife – cutting tool;

a wedge for fixing the knife in the block.

There are planes of the following types:

Sherkhebel for primary wood processing. The blade has a rounded shape, removes a three-millimeter layer of wood in the form of a gutter in one go. The width of the knife is 30 – 35 mm, the cutting angle is 45 o . The dimensions of the pads are (205 – 240) x (50 – 65) x (40 – 50) mm. A plane with a single blade for leveling wooden surfaces. A straight knife with a width of 40 – 50 mm removes 0.5 mm of chips in one go. The dimensions of the pad correspond to the dimensions of the sherkhebel.

A plane with a double knife for finishing the surface. The purity of the surface treatment is achieved by backing up the wood fibers with a chip breaker, a small (0.3 mm) layer of the removed wood. The dimensions of the knife and the pads correspond to the characteristics of a plane with a single knife.
Jointers are used for planing long parts. They differ from planes in the width of the knife (60 – 65 mm) and the size of the pad (650 x 70 x 75 – 80 mm). For planing concave and convex surfaces, as well as sampling grooves, planes with shaped knives and various configurations of the sole of the pads are used – humpbacks, kalevki, zentsubeli, faltsgobeli, shpuntubeli, etc.


Cycles are used for planing wooden floors. They are knives attached to the handles at a certain angle.
Measuring and marking devices.


The list of devices used for marking and measuring the dimensions of wooden products is presented in the table.
Device type Purpose Design features Ruler, tape measure, meter Measurement of linear dimensions – Square Marking and checking of right angles A thin bar of a carpenter’s square is inserted into a thick (pad) at right angles. The pad serves as a stop for measurements and marking The angle gauge Measurement and marking of angles Consists of two pivotally connected plates. The angle between the plates is adjustable and fixed by a Small clamp.

The measurement and marking of the angles Differs from the angle gauge by the different thickness of the plates. A thick plate (pad) serves as a stop, as in the longline square Marking of angles 135 and 45° By design, the longline is similar to the square, but the details are located at an angle of 45° Level Control of the horizontal surfaces – Plumb Line Control of the verticality of surfaces – A calibration rail, a cord Control of the straightness of surfaces – A caliper Measuring the dimensions of volumetric parts A compass with curved legs A caliper Accurate measurement of linear dimensions.

Reismus Marking of parallel lines Two bars inserted into a bar with parallel guides The line Marking of parallel lines Resembles a caliper, the legs of which are bent not inward, but towards the side of the line Marking for a tight connection of the parts is a curly device with a working part in the form of a wedge. The wedge is inserted between the mating surfaces. With a nail driven into the plank, marking is performed by moving the Compass tool

Drawing circles – Pencil Drawing lines –

Drilling and threading carpenter’s tool.

For drilling holes in wood, apply:
a partner and a center perk – a pen or tape drill with a wooden handle. In the center of the cutting edge of the perk there is a screw thread; a gimlet is a small drill with a conical cutting part and a thread; a sliding drill for drilling shallow holes of large diameter, near the cutting part of which there is a retractable rod with a cutter at the end; a rotifer is a tool with a chuck for clamping drills having a cranked design; a manual or electric drill; a drilling machine.

Wood drills have a spike or screw thread in the center of the cutting edge to facilitate the drilling process and protrusions along the edges of the cutting edge to increase the smoothness of the hole walls.


Grooves of various shapes are made with chisels and chisels. The chisel differs from the chisel by the presence of a metal ring at the end of the handle. The chisel has a thinner blade, is used for sampling small grooves, chamfering. The chisel is used for hollowing out holes.


For threading, special dies (valves), cutters, taps, lathes with appropriate equipment are used. Wood carving is cut with a large step, it has a round or trapezoidal profile.


Additional equipment


To work with wood, you will need a workbench. It is equipped with stops, bumpers, tool depressions, a clamping joiner’s tool. To install the stops, through holes are drilled in the working board.
Two vises are attached to the edges of the workbench to fix long parts. Clamps serve as an additional tool for fixing wooden products. They are used for gluing, simultaneous drilling of several parts.


The axe is considered the carpenter’s main tool. They perform the primary processing of wood. To hammer nails, you will need a hammer and a doboynik – a metal rod, one end of which is sharpened on a truncated cone. To connect the parts “spike into the groove”, a mallet is used – a massive wooden hammer. A sharpener for sharpening axes, knives, chisels will be useful in a carpentry workshop.


Over the centuries-old history, man has come up with many devices for processing wood. Carpenter’s equipment can consist of several dozen tools and is constantly updated with new devices.

Share to friends
HARBOR FREIGHT